Window comparison and replacement guides
Find guides on opening styles, glazing, fit and quotes.
Opening styles and room fit
How each style opens
- How a casement window opens
Check a casement window's hinge side, handle position and movement before choosing it for an opening.
- How an awning window opens
Check the sash movement, reach and clearance of a top-hinged awning window for the room you plan to use it in.
- How a sliding window opens
Understand which panel moves on a horizontal slider and check the reach, opening width and screen arrangement.
- How a single-hung window opens
Check whether a single-hung window gives you the opening position, reach and cleaning access you need.
- How a double-hung window opens
Check where the two sashes of a double-hung window move, and compare upper and lower opening positions.
- When does a fixed window make sense?
Decide whether daylight and a view are enough for an opening, or whether it also needs a window you can open.
- How a tilt-turn window opens
Compare the tilt and inward swing modes of a tilt-turn window against your room and the exact operating instructions.
Compare two styles
- Compare casement and awning windows
Compare a side-hinged casement and a top-hinged awning by where their sashes move and how you will use the controls.
- Compare sliding and double-hung windows
Compare where a horizontal slider and a double-hung window leave usable opening space, from the same room position.
- Compare single-hung and double-hung windows
Find out whether moving the upper sash would help you, and compare the reach and cleaning details of the exact models.
- How to pair a fixed window with an opening window
Keep the view where it matters and put the moving section where you can use, clean and reach it.
Fit the room and what’s nearby
- Which windows are easier to use over a kitchen counter?
Compare handle reach and sash movement over a kitchen counter before choosing a window by style alone.
- How to compare windows facing a walkway
Compare window styles where a moving sash could project near a path, patio or entrance.
- How to compare windows with blinds or curtains
Check how each window opens, closes and locks with the current blinds, curtains or nearby furniture in place.
- How to compare window operation in a bathroom
Compare window controls, coverings and opening positions with a bathroom's privacy and ventilation needs in mind.
- How to compare window operation in a bedroom
Choose a bedroom window you can reach from its usual spot and operate comfortably with furniture and coverings in place.
- How to check nearby window sashes for overlap
Compare the open positions of adjacent windows, shutters or doors before choosing units that may use the same space.
Ventilation, controls and cleaning
- How to compare usable window openings for ventilation
Compare the actual free opening, screen and operating position instead of assuming two windows of the same outer size provide the same opening.
- How to plan airflow between opening windows
Consider where two openings sit, when you can use them and what gets in the way of everyday airflow.
- How to compare cleaning access by window style
Ask how the inside and outside surfaces of each window can be reached and what the exact model allows for cleaning.
- How to compare insect screens by window style
Check screen coverage, placement and access for the exact window positions you plan to use.
- Compare window cranks and hand-operated sashes
Compare reach, grip and the steps to open and close a window using its exact handle, latch or sash grip.
- How to choose which side a window opens on
Describe hinge side, moving sash and handle location from a named viewpoint so you and the supplier compare the same configuration.
Glazing, fit and quotes
Compare performance figures
- Whole-window and centre-of-glass ratings
Identify which part of a window a rating describes and match the frame, sash and glass to the configuration on your quote.
- How to compare window U-factor and Energy Rating
Use U-factor to compare heat flow, and read Canada's Energy Rating alongside solar gain and air leakage for the exact window.
- Compare solar heat gain on different walls
Read solar heat gain figures alongside the wall direction, times of direct sun and the shade already around each opening.
- What visible transmittance tells you about daylight
Compare visible transmittance and glass samples while accounting for frame width, tint and reflective appearance in ordinary light.
- Read window air leakage figures on the same basis
Check the test pressure, units and product configuration behind window air leakage figures, then separate product and installation questions.
- Comparing window water and wind test results
Ask which window size and configuration were tested for water and wind, and have the project team confirm the opening's requirements.
- Compare window sound test results with your noise
Describe the noise in the room and ask for comparable sound test information for the full proposed window, glass, frame and seals.
Review the glass package
- Double and triple glazing as complete packages
Compare double-pane and triple-pane options by whole-window results, glass make-up, visible light and the exact sash that carries them.
- What to check about a window glass spacer
Locate the spacer in a sealed glass unit, compare its visible appearance and ask how it relates to the quoted whole-window results.
- How to compare window gas fill options
Confirm what fills the spaces in a sealed glazing unit and compare the documented complete window instead of relying on a gas name.
- Compare the low-E options on a window quote
Identify the actual low-E coating and glass code, and compare the resulting solar gain, visible light and heat transfer values.
- Specify the right glass on each window line
Identify which pane must be tempered, laminated or otherwise specified and confirm the exact glass identification for each opening.
Check the opening and installation
- How to compare window frame sections
Read sections for two windows to compare frame depth, visible glass, finish and the scope of any performance figures.
- Insert or full-frame window replacement?
Compare which parts of the existing frame and trim remain, what can be inspected and what changes in the finished opening.
- Flanged and block frames on a window quote
Identify which window frame is proposed and ask for the installation detail that shows how it connects to your existing wall.
- Compare drainage and flashing in window proposals
Ask for a window installation sketch showing the water path, the existing wall connection and what is included at each side of the opening.
- What to flag on a window opening before ordering
Record visible stains, shifted trim and hidden areas of an opening, then ask how the installer will investigate and approve changes.
- Window replacement details for brick and siding
Compare how window proposals meet brick, siding or both, including the finished trim, access to wall layers and drainage details.
Read the scope and quote
- Compare window trim and finishing allowances
Separate the new window from casing, extensions, cladding repairs and painting so each proposal shows what the finished opening includes.
- Plan the order of work for replacement windows
Agree when openings are checked, when surrounding finish work happens and who verifies the fitted windows before the project closes.
- Compare window quotes line by line
Match the product, glass and installation scope for every opening, then separate options, allowances and items left to another contractor.
- Compare product, glass and installation warranties
Read the written coverage and contact information for the window, sealed glass and installation, and keep the terms with your final quote.
- Make a window schedule for several openings
Track room labels, glazing, frame, work scope and decisions for each opening so a multi-window project can be compared consistently.
Compare styles for your room
Pick what matters at the opening and shortlist the styles you want to discuss.