How to compare window U-factor and Energy Rating

U-factor and Energy Rating describe different things. Read both with the units and identify the window configuration behind each result.

Start with the heat flow figure

U-factor describes heat transfer through a product. At comparable conditions, a lower U-factor means less heat passes through. Compare values for whole windows and check the units. A metric value and an inch-pound value can look far apart on the page even when they refer to the same product. Use a consistent unit in your comparison and keep the model and glazing details alongside it.

Find what contributes to the overall rating

The Canadian Energy Rating, or ER, combines heat transfer, solar heat gain and air leakage into a single result. Two windows can therefore have similar ER values and different U-factors or solar gain. Read the individual values when the opening has a specific issue, such as strong afternoon sun or discomfort near the glass in winter. Ask the seller to identify which tested configuration each rating represents before comparing it with another product.

Record the result that answers your concern

Write down the project priority and which rating helps you judge it. Keep all the figures available when a glazing or frame choice changes. Ask for the separate values if a quote lists only ER.

Natural Resources Canada’s guide to energy ratings

Put your questions in a project brief

Include the room, the opening and any details you want checked.

Start a window project